Petroleum  vs  Synthetic   ...   And Test Results Of The Most Popular Oils

   With petroleum oil in the engine...88% of the internal contamination comes from the oil.  This is because
of the chemical reactions within the engine's crankcase between petroleum oil and various by-products of
combustion, including sulfur, heat and water.  It is not the by-products themselves that make the oil dirty. 
It is the chemical reactions caused by the by-products.

   AMSOIL is not susceptible to these chemical reactions in the crankcase.  To understand this, we must
look at the differences in molecular structure of petroleum and AMSOIL.

   Petroleum is a hydrocarbon.  AMSOIL is a diester formed by combining fatty acids with isopropyl alcohol
in a five million dollar synthesis machine.  AMSOIL is 100% saturated.  This means that it is made up
entirely of tightly bonded molecules that are extremely difficult to break apart.

   Petroleum oils are less than 55% saturated...often less than 50%.  This means that almost half of every
quart of oil you put in your engine is unsaturated...or loosely bonded molecules of hydrocarbons.  It is not
the saturated part of petroleum that causes difficulties...it is the half that's unsaturated.

   There are several damaging chemical reactions that are constantly happening to the unsaturated or
loosely bonded hydrocarbons.  Some of the more serious are:

            ~ Sulfur reacts with petroleum oil to form sulfuric acid.  This happens as soon as you start
               your engine with freshly changed oil.
            ~ Sulfuric acid reacts chemcially with the loosely bonded hydrocarbon molecules to precipitate
               out tar and sludge.
            ~ The unsaturated hydrocarbons oxidize at high temperatures to form gum and varnish.
            ~ Condensation enters the loose molecular structure and turns the oil gray.  Water has a higher
               surface tension than oil.  It tends to cling to metal surfaces causing rust and corrosion.
            ~ Polymers added to petroleum oil improve viscosity shear and break, causing the thickening
               of the lubricant.

   AMSOIL's high surface tension (higher than water) causes it to cling to metal and to sheath
tiny particles of water into a glove of AMSOIL until the temperature of the water rises above
212 degrees Fahrenheit.  Then 100% of the water evaporates preventing any moisture build-up
in the motor or drive train.  Condensation can therefore...be easily tolerated with AMSOIL.

         AMSOIL's Film Strength Is Over 3250 PSI...Petroleum oil ranges from 250-550- psi

   AMSOIL has extremely high film strength.  Film strength refers to the amount of pressure it takes to
squeeze the lubricant out from between two flat pieces of steel.  Petroleum oil ranges from 250-550 psi. 
AMSOIL's film strength is over 3250 psi.

   Therefore...the entire inside of the engine "floats" on a film of Amsoil.  This is the reason for the
average increase in gas mileage of 12% and 6% boost in horsepower that users are experiencing.

   AMSOIL is by nature...a high detergent lubricant.  It has been specifically formulated for high
detergency without using detergent additives that quickly break down and wear out.  This is possible
becasue of the chemical makeup of AMSOIL.

   As a result...AMSOIL has the ability to remove tar...sludge...varnish and other deposits from the
inside of the crankcase...leaving wear surfaces mirror clean.

   Gum and varnish are the causes of the following problems in engines:

         A.  Gummy rings...the MAIN reason why engines burn oil.
         B.  Sticky lifters...may cause clattering and burned valves.
         C.  Varnish glazed piston walls...increases oil consumption.
         D.  Varnish glazed seals...the most common cause of oil leaks.

   AMSOIL's extremely high detergency means that it is capable of reducing and/or eliminating the
above problems.

   AMSOIL has a very high seal compatiblilty.  Petroleum oil shrinks cork gaskets and requires a
"swelling agent" additive to prevent this or limit its effect.  AMSOIL has the ability to restore petroleum-oil-
hardened neopreme and rubber seals to their original resiliency.  AMSOIL does not shrink cork gaskets.

   AMSOIL Gives You The Luxury Of Changing Your Oil Once A Year...Or Every 25,000 Miles!

   Why 25,000 miles?  In laboratory tests...the first signs of non-exterior contaminants show up sometime
after 30,000 miles.  25,000 miles is therefore a conservative figure.  Samples of oil can be sent to any oil
testing laboratory for analysis (AMSOIL has a kit available for that...Analysis Kit#G-1451) should a user
feel uneasy about extended service.

    Amsoils Synthetic Oil Knows How To Take The Heat. 

    I compare the molecules in Amsoil synthetic oil to a steel ball bearing.  The molecules do not break down.
You can drive 25,000 miles or one year without changing your oil!   Amsoil synthetic oil spreads a film of
lubrication throughout your engine…preventing costly repairs and breakdowns…saving you time and money!

    Test Results Of The Most Popular Motor Oils

    Let's see how Mobil 1, Pennzoil, Quakerstate, Castrol, Shell, Havoline, Motorcraft, Chevron and Tropic Artic
    stack up against Amsoil synthetic oil.

    NOTE:  When you enter the webpage...click on each graph to enlarge.
    
    Click here for the seven different test results

    Change Your Oil Six Times A Year For $162…Or Just Once A Year For $104.00!

    If you drive 18,000 miles a year…you’d change your oil six times. 
    Six oil changes at a quick lube @ $27 x 6 = $162 a year.

    Amsoils premium synthetic oil 0W-30…5 quarts @ $11.30 qt = $56.50…
    Plus 1 Amsoil EaO oil filter @ $17.50 plus $15 to change oil…
    Plus $15- Tax & Shipping. Total: $104.00…retail price.

    The 0W-30 will give you better gas mileage (couple miles per gallon more) and increased horsepower! 

• Change your oil and filter today…and in 12 months…change the oil and filter again!
• What could be more convenient and beneficial for your vehicle and the environment?

     Click Here For More Information on Amsoils Premium Synthetic 0W-30 Motor Oil

     Click Here For Information On Amsoils Remarkable 25,000 Mile EaO Oil Filter

When ordering…be sure to use ID# 516778.

     Click Here For Information On  Amsoil 5W-40 Synthetic Premium diesel Oil for 2007 And Higher 
    
     Click Here For Information On Amsoil 15W-40 Synthetic Heavy Duty Diesel Oil For 2006 And Lower
    
     Click Here To Become A Preferred Customer…(Cost: $20)...Purchase At Wholesale...Save 15-20%  

================================================
      Want An Amsoil Catalogue Mailed To You...IT'S FREE!!
      Call 800-956-5695...Monday -  Friday...7 am - 5 pm CST.
      Use Referral# 516778...When Requesting Info Or Signing
      Up As A Preferred Customer Or Dealer.
================================================

    To get started…call my office at 937-548-0239 or cell @ 937-417-1127… 
    or call Amsoil @ 715-399-8324 for technical support…you’ll need referral# 516778. 

    Happy Trails...

    John Schlimmer                                    
   Greenville, Ohio                                                                
    937-548-0239...office   ...   937-417-1127...cell                                  
    Independent Amsoil Dealer ... jbs33@embarqmail.com    

     PS...Need some extra spending money or serious income...
    Become a Dealer...and share this remarkable product with
    anyone that has a vehicle.

     Copyright 2009   ...   by John Schlimmer